AdamsBlinds / External shading
Terms for products and services
These terms apply to enquiries and orders handled through External Blinds. Your written quotation and order confirmation identify the exact products, service scope, charges and arrangements agreed for the project.
Your supplier
Your supplier is Bexmon Limited, trading as AdamsBlinds.co.uk, company number 07703609 and VAT number GB117844210. The registered office is 292 Wake Green Road, Birmingham, B13 9QP. It is a registered office only and does not accept customer visits. Contact info@adamsblinds.co.uk or 07849 709975.
Submitting a form requests a quotation or a discussion. It does not place an order or reserve an appointment. We offer suitable dates and explain any survey charge before you agree to a visit.
Estimates, surveys and coverage
Initial estimates by email or WhatsApp are free. An estimate based on photographs, approximate dimensions or plans is provisional until the product, configuration, site requirements and any necessary survey are agreed.
Surveys are usually free. If a survey charge applies, the amount including VAT is agreed before booking and payable before the visit. It is credited against an order that proceeds. The fee is normally non-refundable, subject to statutory cancellation and refund rights and any refund due if we cannot provide the agreed service.
We welcome UK enquiries for measuring, supply and installation of external blinds, awnings, pergolas and canopies. Service availability depends on the address, selected products, site conditions, access and project scope. UK delivery is available for suitable supply-only orders; delivery restrictions and charges are confirmed before an order is accepted.
Project scope and supply-only enquiries
Any minimum project requirement is confirmed with the quotation. This collection covers external roller and roof blinds, retractable patio awnings, louvered pergolas, retractable fabric canopies and the compatible options shown for those systems. Availability of an accessory on its own or with an existing installation must be confirmed for the individual enquiry.
For supply-only enquiries, send the product name, quantity, intended position, approximate dimensions, preferred finish and operation. We agree the final specification, sizing basis, included equipment, delivery and installation responsibilities before accepting an order. Technical diagrams and general website dimensions are not a final installation design.
Colour samples and product imagery
Shortlisting a fabric, mesh or frame finish records the options you would like to discuss. It does not place a sample order or confirm dispatch. We confirm sample availability, format, any charge and delivery arrangements before organising samples. A small sample helps assess colour and texture; it does not reproduce the full variation or scale of a finished installation.
Screen colours and photographs are indicative. Fabrics can vary between dye batches, and pattern scale should be checked against the chosen blind size. Fabric type, pattern direction, seams, mesh openness, metalwork finish and other details are confirmed for the selected configuration. Collection photographs and illustrations show possible settings and are not presented as completed AdamsBlinds projects. The agreed specification and any confirmed physical sample identify the selected finish.
Specification and order confirmation
Check the product model, quantities, dimensions, projection or drop, fabric, metalwork finish, operation, included accessories and fitting arrangement on the quotation and confirmation. Tell us about any discrepancy before approving the order. Screen colours are indicative; the agreed specification and any confirmed samples identify what is being ordered.
An order proceeds when we confirm acceptance and receive the payment agreed for it. Changes after approval may alter cost or timing and may not be possible once production has started. Any proposed additional charge must be explained and agreed.
Our like-for-like price-match promise applies to a genuine written quotation for an equivalent complete supply-and-installation project, including products, materials, specification and services. It applies to complete projects only, not components. Send the competing quotation before ordering so we can check the comparison.
Prices, quotation validity and payment
Quotations are valid for 15 days unless they state otherwise. Consumer quotations show the total including VAT and identify agreed delivery, survey or service charges.
For fitted projects, the standard arrangement is 50% on order and the remaining payment before installation to secure the appointment. Supply-only orders must be paid in full before dispatch, with the payment schedule confirmed in the quotation.
There is no online checkout. Use the payment instructions provided with your quotation or invoice; do not enter payment-card details into the enquiry form.
Delivery, lead times and fitting
Availability, production acceptance, any minimum quantities and estimated delivery or installation times are confirmed for the chosen products. A finish, size or configuration may be restricted or discontinued. Website inclusion does not confirm stock or a production slot. We will communicate material changes to agreed timing and discuss the available next steps.
Tell us about the building or supporting structure, known concealed services, drainage, ground conditions, existing fittings, access restrictions and parking. The project scope must identify suitable fixing positions, mounting arrangements, foundations or bases where needed, and any special access equipment. Electrical work, structural work, groundwork, scaffolding, removal of existing products and making good are included only where expressly stated in the quotation.
Measuring forms part of our agreed supply-and-installation service. We do not offer a stand-alone measuring service that hands over measurements for an outside order. If a product supplied by AdamsBlinds develops a problem, contact us for an assessment. We do not offer repairs to products supplied by another business.
System suitability, site conditions and controls
The proposed system must suit the actual opening or outdoor space, supporting structure and exposure. Maximum sizes on a product page are configuration limits, not confirmation that every combination of width, projection, drop or accessory is available. We confirm the dimensions and mounting arrangement for the quoted design.
Fabric, frame finish, roof type, operation and accessories must be available together in the selected system. Side screens, lighting, heaters, sensors and connections to existing structures need checking for the particular installation. A similar appearance does not establish compatibility.
For powered products, the electrical supply, switching, remote controls and any sensors or connected features are confirmed in the quotation. Existing equipment, apps and voice assistants are not assumed compatible. Connected features may require a suitable network, an account or additional equipment. Fixed electrical work must be carried out by a suitably qualified person and is included only where expressly agreed.
Fitting and operation must follow the instructions for the exact product. Structural, wind, drainage, fire-performance or other project-specific requirements need evidence for the selected configuration and application. A general material description or product maximum is not certification of the complete installation.
Permissions and work by other contractors
Planning permission, building regulations, listed-building requirements and landlord, freeholder or management-company consent depend on the property and proposal. A product photograph or general description does not confirm that permission is unnecessary. Tell us about relevant restrictions before the design is finalised and establish any approvals needed before work starts.
Any agreed work by a builder, electrician, groundworker or other contractor must be coordinated with the installation requirements and programme. The quotation identifies the work AdamsBlinds undertakes and any preparation required from others. This does not remove our responsibility for the goods and services we agree to provide.
Appearance, privacy and performance
Light control, privacy, screening and durability depend on the complete product, its dimensions, operation, installation and setting. We confirm the technical information relevant to the quotation. General descriptions do not promise a particular temperature reduction, energy saving, acoustic rating or result at every opening.
Screen fabrics filter light and visibility according to the mesh, colour and lighting conditions. Mesh screening does not provide guaranteed night-time privacy, particularly when the space behind it is illuminated. External shading can reduce exposure to solar heat and glare, but the result depends on glazing, orientation, ventilation and the completed installation.
Awning fabric described as water-repellent is not a promise of a waterproof enclosed room. Pergola roofs and canopies have specified drainage and weather limits. Wind sensors and other automatic controls assist operation but do not replace the supplied instructions or the need to retract or secure a system when required. No general claim of suitability for storms, snow, frost or every exposed location is made.
Supply-only dimensions and installation responsibilities
For supply-only orders, we agree whether quoted dimensions refer to an overall system, fabric, opening, projection, drop or another stated measurement. Check dimensions, mounting details, site suitability and included equipment before approving production. Do not make deductions from general diagrams or assume brackets, foundations, electrics or installation labour are included unless they are listed in the quotation.
Where AdamsBlinds undertakes the survey and installation, responsibility for our work remains with us. Customer-provided information does not remove your rights if the goods or services we supply are faulty, incorrectly described or otherwise fail to meet the contract.
Consumer cancellation and standard-product returns
For eligible standard goods bought by a consumer at a distance, including eligible standard stock items, you normally have 14 days after receiving the goods to tell us you wish to cancel, followed by 14 days to send them back. Email info@adamsblinds.co.uk with a clear cancellation statement and your order details. We will confirm the appropriate return arrangements.
Where this right applies, the refund includes standard outbound delivery charges. Unless we have offered to collect the goods, we refund within 14 days of receiving them back or receiving evidence of return, whichever is earlier. Refunds use the original payment method unless you agree otherwise, without a refund fee. You pay direct return costs only where we informed you of that responsibility before the contract. A deduction may apply for loss of value caused by handling beyond what is reasonably necessary to inspect the goods.
Goods genuinely made to a consumer’s specifications or clearly personalised may fall within the statutory exception to change-of-mind cancellation. This can include a system manufactured to bespoke dimensions; we explain whether the exception applies before you agree. Merely ordering a standard product or choosing from standard options does not automatically remove cancellation rights. Faulty or misdescribed goods remain subject to your statutory remedies.
Consumer cancellation rights apply to qualifying purchases outside a trade or business. Returns for business purchases are subject to the written arrangements agreed for the order and applicable law.
Services, changes and cancellations
A qualifying service contract can be cancelled from the time it is agreed until the end of 14 days after that day. If you ask for a service to start during that period, we obtain the required express request and explain any proportionate amount payable if you then cancel. Ending the cancellation right when a service is fully performed requires the applicable information and consent.
Tell us promptly if an order or appointment needs to change. Any cancellation charge must reflect applicable law, the agreed terms and work or costs properly incurred. A payment is not automatically forfeited where you are legally entitled to a refund.
Optional cancellation template
For an order with a statutory cancellation right, you may use this wording or make another clear statement: To Bexmon Limited, trading as AdamsBlinds.co.uk, 292 Wake Green Road, Birmingham, B13 9QP; info@adamsblinds.co.uk. I give notice that I cancel my contract for the following goods or services: [details]. Ordered on / received on: [date]. Order reference: [reference]. Customer name: [name]. Customer address: [address]. Date: [date]. Signature: [only if sent on paper].
Guarantees and additional manufacturer cover
Our installation and workmanship guarantee is six months from completion of fitting. Products have a twelve-month guarantee from delivery for supply-only orders or completion of fitting for supplied-and-fitted orders. Motors and electrical components have twelve months of cover, with any longer applicable manufacturer warranty confirmed for the quotation.
Any additional manufacturer cover is confirmed for the particular product, configuration and quotation, including relevant conditions. A reference to extended cover for one product does not mean it applies to every model, fabric, accessory or operating system in this collection.
Voluntary guarantees do not replace, limit or shorten your statutory rights. Contact us with the order reference and a description or photograph of a problem so we can assess the correct remedy.
Aftercare and maintenance
Maintenance, adjustments or visits outside applicable guarantee cover and statutory remedies may be chargeable. The scope and charge are explained before paid work is agreed. A remedy that you are legally entitled to receive free of charge is not treated as paid aftercare.
Follow the operation and care instructions supplied for the selected product. Keep guides, moving parts and drainage routes clear, use cleaning methods suitable for the material, and do not force a jammed or frozen mechanism. Allow wet fabric to dry in suitable conditions where the product instructions require it. The supplied instructions take precedence over general website advice. Regular servicing or specialist inspection is included only where specifically agreed.
Questions and complaints
Email info@adamsblinds.co.uk with your enquiry or order reference and a clear description of the issue. Customer service is available Monday–Friday, 9am–5pm. Online enquiries can be sent at any time and we aim to respond within 24 hours.
We will investigate and explain the proposed next step. Your written project arrangements should be read with these terms. Nothing here excludes liability or consumer rights that cannot lawfully be excluded.
Let’s work through the details
Get a quote.
Plan your project.
Send your photographs, approximate dimensions and preferred finishes. We’ll check suitable shading and agree the measuring, supply and professional installation you need.
- Free initial estimates by email or WhatsApp
- UK-wide supply and installation enquiries
- Supply-only enquiries welcome
Monday–Friday, 9am–5pm
Online enquiries at any time.
We aim to reply within 24 hours. Appointment dates and any specialist installation requirements are confirmed by our team.
