AdamsBlinds / BlackOut Skylight Blinds
Terms for products and services
These terms apply to enquiries and orders handled through BlackOut Skylight Blinds. Your written quotation and order confirmation identify the exact products, service scope, charges and arrangements agreed for the project.
Your supplier
Your supplier is Bexmon Limited, trading as AdamsBlinds.co.uk, company number 07703609 and VAT number GB 117 844210. The registered office is 292 Wake Green Road, Birmingham, B13 9QP. It is a registered office only and does not accept customer visits. Contact info@adamsblinds.co.uk or 07849 709975.
Submitting a form requests a quotation or a discussion. It does not place an order or reserve an appointment. We offer suitable dates and explain any survey charge before you agree to a visit.
Estimates, surveys and coverage
Initial estimates by email or WhatsApp are free. An estimate using photographs or approximate measurements is provisional until the product, specification and any required survey are agreed.
Surveys are usually free. If a survey charge applies, it is £150 including VAT, agreed before booking and payable before the visit. It is credited against an order that proceeds. The fee is normally non-refundable, subject to statutory cancellation and refund rights and any refund due if we cannot provide the agreed service.
We welcome UK enquiries for measuring, made-to-measure product supply and installation. Availability depends on the address, selected products, site conditions, access and project scope, and is confirmed individually before quotation. UK delivery is also available for suitable supply-only orders.
Minimum project value and supply-only enquiries
Our usual minimum value for a complete supply-and-installation project is £500, with exceptions considered individually. Sample enquiries and supply-only arrangements are assessed separately. This collection supplies complete skylight blinds; individual motors, chargers, controls and components are not sold separately. Any minimum production quantity is confirmed with the quotation.
For supply-only enquiries, tell us the product, intended use, approximate quantity and complete roof-window references, or the requested custom measurements. We confirm the window match or manufacturing dimensions, operation, fixing requirements and delivery arrangements before accepting an order. Control illustrations support identification and discussion within a complete blind project. Visual similarity does not establish compatibility.
Finish samples and product imagery
Shortlisting a finish records the options you would like to discuss. It does not place a sample order or confirm dispatch. We confirm sample availability, format, any charge and delivery arrangements before organising samples. A small sample helps assess colour and texture; it does not reproduce the full variation or scale of a finished installation.
Screen colours and photographs are indicative. Fabrics can vary between dye batches, and pattern scale should be checked against the chosen blind size. The visible fabric, backing and frame detail are confirmed for the selected configuration. Collection photographs and illustrations show possible settings and are not presented as completed AdamsBlinds projects. The agreed specification and any confirmed physical sample identify the selected finish.
Specification and order confirmation
Check the product references, quantities, materials, finish, manufacturing dimensions, operation and fitting arrangement on the quotation and confirmation. Tell us about any discrepancy before approving the order. Screen colours and product images are indicative; the agreed specification and any confirmed samples identify what is being ordered.
An order proceeds when we confirm acceptance and receive the payment agreed for it. Changes after approval may alter cost or timing and may not be possible once production has started. Any proposed additional charge must be explained and agreed.
Our like-for-like price-match promise applies to a genuine written quotation for an equivalent complete supply-and-installation project, including products, materials, specification and services. It applies to complete projects only, not components. Send the competing quotation before ordering so we can check the comparison.
Prices, quotation validity and payment
Quotations are valid for 15 days unless they state otherwise. Consumer quotations show the total including VAT and identify agreed delivery, survey or service charges.
For fitted projects, the standard arrangement is 50% on order and the remaining payment before installation to secure the appointment. Supply-only orders must be paid in full before dispatch, with the payment schedule confirmed in the quotation.
There is no online checkout. Use the payment instructions provided with your quotation or invoice; do not enter payment-card details into the enquiry form.
Delivery, lead times and fitting
Availability, production acceptance, minimum quantities and estimated lead times are confirmed for the chosen products. The collection is generally available to enquire about, but a particular range, finish or configuration may depend on the selected system, finish and manufacturing specification. Products can be changed or discontinued. Website inclusion does not confirm stock or a production slot. We will communicate material changes to agreed timing.
Provide safe access and tell us about the construction of the opening, handles, existing fittings, concealed services, parking and access restrictions. We agree fixing positions, preparation and any special access equipment. Electrical work, structural work, scaffolding, removal of existing products and making good are included only where the quotation expressly provides for them.
Measuring forms part of our agreed supply-and-installation service. We do not offer a stand-alone measuring service that hands over measurements for an outside order. If a product supplied by AdamsBlinds develops a problem, contact us for an assessment. We do not offer repairs to products supplied by another business.
Window compatibility, fitting and controls
Standard manual and solar skylight blinds are matched to supported roof-window brands, full model and size codes, with the frame version checked where relevant. Window-maker names describe compatibility; these products are alternatives supplied by AdamsBlinds, not blinds manufactured by those window brands. Photographs of the full identification plate and opening help establish the correct configuration.
The custom manual route requires separate internal frame width and height, visible glass width and height, and frame-depth checks. Published dimension bands do not establish that every combination can be made. The frame surfaces, cassette, guide-rail positions, handle, opening movement and access must all suit the selected system. Flat rooflights, lanterns, shaped glazing and unusual openings require individual assessment.
Solar operation uses the specified motor, rechargeable battery and solar charging arrangement. Daylight exposure, shading and use affect charging. Existing roof-window controls, remotes, hubs and apps are not automatically compatible. The supplied controls, any connected equipment and access arrangements are confirmed in the quotation. A custom-size powered version is not assumed to be available.
Any fire-performance or other technical requirement must be checked against evidence for the exact material and application. A fabric label is not certification of the complete installation. Electrical work and specialist access are included only where agreed in the quotation.
Appearance, privacy and performance
Light control, privacy, screening and durability depend on the complete product, its dimensions, operation, installation and setting. We confirm the technical information relevant to the quotation. General descriptions do not promise a particular temperature reduction, energy saving, acoustic rating or result at every opening.
BlackOut is the range name. Blackout and translucent finishes have different light-control properties, and other material properties must be confirmed for the selected finish. Blackout fabric is intended to stop light through the material; translucent fabric admits diffused daylight. The cassette, guides, fitting and other light entering the room affect the overall result. No promise of complete room darkness in every condition is made.
Follow the operation instructions supplied for the exact window and blind, including the permitted blind position when opening, ventilating or cleaning the window. Check that the handle and intended opening movement remain usable. Do not force a manual or motorised mechanism if it catches or becomes uneven.
Supply-only measurements and compatibility
For supply-only orders, confirm the full roof-window reference or required custom dimensions, product selection and compatibility before manufacture or dispatch. We explain the measurement format required and any agreed allowances; a window size code, glass measurement and finished product dimension are not interchangeable. Do not choose the nearest code or make your own deductions.
Where AdamsBlinds undertakes the survey and installation, responsibility for our work remains with us. Customer-provided information does not remove your rights if the goods or services we supply are faulty, incorrectly described or otherwise fail to meet the contract.
Consumer cancellation and standard-product returns
For eligible standard goods bought by a consumer at a distance, including eligible standard stock items, you normally have 14 days after receiving the goods to tell us you wish to cancel, followed by 14 days to send them back. Email info@adamsblinds.co.uk with a clear cancellation statement and your order details. We will confirm the appropriate return arrangements.
Where this right applies, the refund includes standard outbound delivery charges. Unless we have offered to collect the goods, we refund within 14 days of receiving them back or receiving evidence of return, whichever is earlier. Refunds use the original payment method unless you agree otherwise, without a refund fee. You pay direct return costs only where we informed you of that responsibility before the contract. A deduction may apply for loss of value caused by handling beyond what is reasonably necessary to inspect the goods.
Goods genuinely made to a consumer’s specifications or clearly personalised may fall within the statutory exception to change-of-mind cancellation. We explain whether that exception applies to the particular order before you agree to it. We do not treat every skylight blind as exempt simply because it is in this collection, supplied to order, described as made to measure or selected using a standard window code. Faulty or misdescribed goods remain subject to your statutory remedies.
Consumer cancellation rights apply to qualifying purchases outside a trade or business. Returns for business purchases are subject to the written arrangements agreed for the order and applicable law.
Services, changes and cancellations
A qualifying service contract can be cancelled from the time it is agreed until the end of 14 days after that day. If you ask for a service to start during that period, we obtain the required express request and explain any proportionate amount payable if you then cancel. Ending the cancellation right when a service is fully performed requires the applicable information and consent.
Tell us promptly if an order or appointment needs to change. Any cancellation charge must reflect applicable law, the agreed terms and work or costs properly incurred. A payment is not automatically forfeited where you are legally entitled to a refund.
Optional cancellation template
For an order with a statutory cancellation right, you may use this wording or make another clear statement: To Bexmon Limited, trading as AdamsBlinds.co.uk, 292 Wake Green Road, Birmingham, B13 9QP; info@adamsblinds.co.uk. I give notice that I cancel my contract for the following goods or services: [details]. Ordered on / received on: [date]. Order reference: [reference]. Customer name: [name]. Customer address: [address]. Date: [date]. Signature: [only if sent on paper].
Guarantees and additional manufacturer cover
Our installation and workmanship guarantee is six months from completion of fitting. Products have a twelve-month guarantee from delivery for supply-only orders or completion of fitting for supplied-and-fitted orders. Motors and electrical components have twelve months of cover or the applicable manufacturer warranty, as confirmed for the quotation.
Any additional manufacturer cover is confirmed for the particular product, configuration and quotation, including relevant conditions. Manufacturer brochures and general website pages do not extend that cover or create a blanket guarantee for the complete range.
Voluntary guarantees do not replace, limit or shorten your statutory rights. Contact us with the order reference and a description or photograph of a problem so we can assess the correct remedy.
Aftercare and maintenance
Maintenance, adjustments or visits outside applicable guarantee cover and statutory remedies may be chargeable. The scope and charge are explained before paid work is agreed. A remedy that you are legally entitled to receive free of charge is not treated as paid aftercare.
Follow the operation and care instructions supplied for the selected product. Use appropriate cleaning methods for the material, keep moving parts clear and do not force a jammed mechanism. Use only the cleaning and charging methods specified for the selected material and operating system. The supplied product instructions take precedence over general website advice. Regular servicing or specialist inspection is included only where specifically agreed.
Questions and complaints
Email info@adamsblinds.co.uk with your enquiry or order reference and a clear description of the issue. Customer service is available Monday–Friday, 9am–5pm. Online enquiries can be sent at any time and we aim to respond within 24 hours.
We will investigate and explain the proposed next step. Your written project arrangements should be read with these terms. Nothing here excludes liability or consumer rights that cannot lawfully be excluded.
Let’s work through the details
Get a quote.
Plan your project.
Share your roof-window codes, photographs and fabric shortlist. We’ll help you choose a suitable blind, then agree the measuring, supply and professional installation you need.
- Free initial estimates by email or WhatsApp
- UK-wide supply and installation enquiries
- Made-to-measure supply-only enquiries welcome
Monday–Friday, 9am–5pm
Online enquiries at any time.
We aim to reply within 24 hours. Appointment dates and any specialist installation requirements are confirmed by our team.
