Product photograph illustrating the system. Colours, frame finish and final configuration are confirmed in your quotation.
BlackOut / Made to measure
BlackOut Custom Skylight Blinds
An unreadable label or an unusual roof window does not always rule out a fitted blind. BlackOut Custom Skylight Blinds are assessed using the internal frame, visible glass and frame depth, rather than choosing a standard size code alone.
The confirmed custom range uses a manually operated spring mechanism, an enclosed top cassette and guiding side rails. Select blackout fabric for stronger room darkening or a translucent option to soften incoming daylight.
Assessed from five frame and glass measurements
Manual spring operation
Suitable frame geometry confirmed before manufacture
UK made-to-measure supply or an agreed measuring and installation service. We confirm availability and the final specification with you.
Use the custom route when identification is not enough
First send any window label you can find. A recognised model is usually the most direct way to establish a fit. Where the code is missing or the frame is outside the standard selection, a dimensional assessment helps us decide whether the custom system is appropriate.
Custom does not mean every rooflight, shape or size can be covered. The rail positions, frame surfaces, opening action and available depth still need to work with the mechanism. A horizontal flat rooflight requires its own suitability check.
Record the frame and visible glass separately
We need the internal frame width and height at the intended fitting position, the visible glass width and height, and the depth from the glass to the frame's front edge. These are separate dimensions, not alternative ways of measuring the same opening.
Provide millimetres and photographs showing where each measurement was taken. Differences between the frame and glass dimensions help describe a tapered frame. Do not deduct an allowance or order a blind from the overall outside window dimensions.
Use the size bands as an initial check
The published bands below are useful for deciding whether to send an enquiry. Every measurement must be assessed together: being inside each band does not by itself confirm a workable combination. We check the construction and final manufacturing dimensions before an order.
If you are unsure about the measuring points or cannot safely reach the window, request a measuring and installation quotation. A clear photograph can often resolve an early question before a visit is arranged.
Finish the specification around the room
Silver and white aluminium finishes are offered in the current custom range. Choose the fabric for its light-control properties, then compare physical samples with your room finishes. We confirm the particular fabric's availability for the proposed blind.
AdamsBlinds offers UK supply only or measuring and installation. If remote operation is essential, tell us at the enquiry stage. A powered custom version is not part of the confirmed standard offer and must be checked before it is proposed.
Specification at a glance
Internal frame width
372–1,160 mm published assessment band
Internal frame height
300–1,350 mm published assessment band
Visible glass width
350–1,160 mm published assessment band
Visible glass height
278–1,350 mm published assessment band
Frame depth
43–80 mm published assessment band
Operation and finish
Manual spring operation; silver or white frame, subject to confirmation
Availability, finished dimensions and the exact fitting configuration are confirmed before order.
Details to discuss
A bespoke assessment where a standard window code cannot be matched
Blackout or translucent fabric
Silver or white cassette and rails
Supply only or measuring and installation
What to check before ordering
All five dimensions and the window construction must be suitable; the ranges do not guarantee acceptance.
Unusual shapes, flat rooflights and obstructions need an individual assessment.
This is not a promise that any discontinued window can be accommodated or that custom solar operation is available.
A few useful answers
Before you enquire
Can you work from the glass size alone?
No. The glass width and height are only part of the assessment. Internal frame dimensions, depth and photographs are also needed.
Should I make deductions from my measurements?
Send the actual dimensions at the agreed measuring points. We confirm any manufacturing allowances; do not make your own deductions.
Can I order if the identification plate is missing?
A missing plate is one reason to consider this route. We still need to establish that the frame and dimensions are suitable before accepting an order.
These photographs show the actual fabric finishes. Screen settings and room lighting affect their appearance, and a small swatch may show only part of a printed design. Shortlist up to twelve finishes to discuss with your enquiry.
Samples are arranged after we confirm availability, format and any charge. A shortlist does not place an order or reserve stock. The exact fabric, blind dimensions and control specification are confirmed in your quotation.
A closer look
Details & inspiration
Red custom-size skylight blind fitted within a timber roof window.Custom-size skylight blind in Celestial Blue Blackout, partly lowered over a timber roof window.Custom-size skylight blind in Smokey Haze Blackout with a silver frame.
Share your roof-window codes, photographs and fabric shortlist. We’ll help you choose a suitable blind, then agree the measuring, supply and professional installation you need.