Hexacell G1 Extra
A G1 roof blind with moving support ribs for larger applications. Explore the practical differences and ask AdamsBlinds to assess your lantern opening.
Explore product : Hexacell G1 ExtraMotorised roof blinds
Product reference G1
A motorised cellular blind for roof lanterns, with concealed belt drive and an open view when retracted. Ask AdamsBlinds about sizes, fabrics and power.
UK-wide supply and installation enquiries. We confirm the configuration, availability and fitting requirements for your project.
Product overview
Hexacell G1 shades a roof lantern with cellular fabric carried inside a four-sided frame. Its belt drive sits within the side channels, leaving the open part of the glazing free from spanning guide wires when the fabric retracts. It suits projects where regular adjustment from a remote is more practical than reaching a handle.
The fabric choice sets the light effect. A light-filtering cloth softens daylight; a blackout cloth blocks light through the material. Edge brushes and the fit around the frame also matter, so we discuss the whole installation when room darkening is a priority.
Power and access deserve attention before the ceiling is finished. Mains, rechargeable battery and suitable solar-assisted arrangements are available. We confirm the motor, controls, cable or charging position and service-cover orientation in your quotation.
Downward-facing covers provide access from the room side. Upward-facing covers leave a smoother underside but can make access harder if a fault leaves the blind closed. We explain the trade-off for the selected motor and power supply.
Send the approximate opening size, a photograph looking up into the lantern and the room postcode. Tell us whether electrical power is available nearby and whether you want filtered daylight or room darkening.
The technical details
| Application | Rectangular roof lantern and roof-glazing openings, subject to survey |
|---|---|
| Operation | Motorised; single fabric stack |
| Minimum width | 392 mm with the listed standard motor arrangement; other motors may differ |
| Sizing | Width, travel and total area are checked together; widths above 1900 mm should be assessed for G1 Extra |
| Installation depth | Published minimum 40 mm; allow any additional space required for the chosen fixing and power arrangement |
| Side-channel section | 36 mm high × 44 mm wide |
| Frame finishes | White, Dark Grey, Dark Coffee or Black |
Limits depend on the selected configuration. Use the relevant product documents and the agreed written specification for your order.
Product resources
AdamsBlinds product summaries support selection. They are not installation instructions or test certificates; the agreed order specification and supplied product guidance apply.
Compare your options
A G1 roof blind with moving support ribs for larger applications. Explore the practical differences and ask AdamsBlinds to assess your lantern opening.
Explore product : Hexacell G1 ExtraA motorised G1 roof blind that divides its fabric between opposite ends. Both halves move together; AdamsBlinds confirms the layout for your opening.
Explore product : Hexacell G1 Split StackA manual cellular blind for suitable roof glazing, with Type A and Type B frames. Explore fabric and fixing options with AdamsBlinds.
Explore product : Hexacell SkyLiteLet’s work through the details
Share the products you have in mind, or tell us what the space needs to do. We’ll help you establish the specification and the next step.
Monday–Friday, 9am–5pm
Online enquiries at any time.
We aim to reply within 24 hours. Appointment dates and any specialist installation requirements are confirmed by our team.