
1022
Slimline ribbed channel with tilt rod
Main rail for the Slimline vertical system.
Aluminium.
Reference only · not sold separately
Original supplier illustrations show the component family. Some drawings represent one of several listed sizes or versions; the exact finish and construction are confirmed in the quotation.
Technical reference / No component sales
The headrail carries the fabric louvres and houses the mechanism that turns them. Slimline, Slimline Vogue and Maestro are separate systems: a similar-looking bracket or carrier does not make them interchangeable. This guide identifies the main rail and operating families used when a complete vertical blind is specified.
Parts information is for identification and technical discussion. We do not supply components separately.
Customer reference only. Components, motors and controls shown here are not sold separately. Use this information to discuss a complete blind or shutter project.
The window width, intended draw direction and fabric determine the rail arrangement. We confirm how the louvres will stack and which side the controls will sit before manufacture.
The tilt rod turns the carriers; the carriers suspend the individual fabric louvres. End sets finish the rail and contain operating details. Fixing brackets attach the completed headrail to the agreed surface.
| Systems shown | Slimline, Slimline Vogue and Maestro |
|---|---|
| Common louvre formats | 89mm and 127mm, depending on the system |
| Operation | Wand or cord-and-chain configuration, as specified |
Original system illustrations
Illustrations show the referenced parts. They are not to scale. Check the exact system and current specification; visual similarity does not establish interchangeability.

1022
Main rail for the Slimline vertical system.
Aluminium.
Reference only · not sold separately
1100 / 1110
Finish the operating and idle ends of a Slimline headrail.
Right-hand and left-hand versions.
Reference only · not sold separately
1019
Carries the fabric carriers and the rotating rod within a Vogue rail.
Aluminium.
Reference only · not sold separately
1120 / 1122
Close the rail ends in the specified operating arrangement.
Right-hand and left-hand versions.
Reference only · not sold separately
1545
Wand-control end arrangement, including the lead truck.
Includes connector plate.
Reference only · not sold separately
1548
End arrangement for a split-draw Vogue blind.
Includes two idle end caps.
Reference only · not sold separately
1542
Wand-control arrangement for a Slimline headrail.
System-specific end set.
Reference only · not sold separately
1531
Suspends and turns a vertical louvre within the specified rail.
89mm and 127mm configurations.
Reference only · not sold separately
1631
Carries fabric louvres using stainless-steel spacer links.
Multiple spacing configurations; exact size is specified.
Reference only · not sold separately
1300 / 1304
Provide a forward-facing fixing for the headrail.
127mm / 89mm versions.
Reference only · not sold separately
1320
Supports the rail from a top fixing surface.
Screw fixing.
Reference only · not sold separately
1325
Clips the completed rail into its top fixing.
Spring fitting.
Reference only · not sold separately
1340 / 1350
Provide an adjustable projection for the rail.
135–185mm / 160–210mm.
Reference only · not sold separately
6012
Main rail for the Maestro vertical blind system.
Aluminium.
Reference only · not sold separately
6102
Finishes the ends of a Maestro rail.
Universal set within the Maestro system.
Reference only · not sold separately
6540
Provides the end and lead-carrier arrangement for wand operation.
Includes end set and lead carrier.
Reference only · not sold separately
6531
Carries the louvres in a Maestro headrail.
89mm and 127mm configurations.
Reference only · not sold separately
6300 / 6304
Provide face fixing for the Maestro headrail.
127mm / 89mm versions.
Reference only · not sold separatelyReference information is drawn from the manufacturer’s January 2026 component documentation. Product generations and specifications can change. The final complete-product specification is confirmed with your quotation.
Let’s work through the details
Tell us which products interest you, save a finish shortlist or show us the space. We’ll help you agree the design, measuring, made-to-measure supply and professional installation you need.
Monday–Friday, 9am–5pm
Online enquiries at any time.
We aim to reply within 24 hours. Appointment dates and any specialist installation requirements are confirmed by our team.
For complete blind or shutter projects. Components in this reference library are not sold separately.