
R2105-DC
500 DC rechargeable motor
Motor option for the compatible System 32 roller arrangement.
0.5Nm rated torque; USB-C charging.
Reference only · not sold separately
Original supplier illustrations show the component family. Some drawings represent one of several listed sizes or versions; the exact finish and construction are confirmed in the quotation.
Technical reference / No component sales
A motor is specified as part of a complete roller or compatible fabric blind. Rechargeable and mains-powered families differ in size, power and control requirements. The original illustrations and technical references below help explain a quotation without presenting the motors as standalone products.
Parts information is for identification and technical discussion. We do not supply components separately.
Customer reference only. Components, motors and controls shown here are not sold separately. Use this information to discuss a complete blind or shutter project.
Charging access, blind width, fabric load and the desired handset or smart-control arrangement are reviewed together. Matter versions are specific motors and should not be assumed to be included with every motorised blind.
Motor torque and the manufacturer’s load figures are system-selection data. They do not establish the maximum size of every finished blind. We confirm the complete specification, current motor version and any electrical work in the quotation.
| Rechargeable families | 500 DC, 1100 DC, 1100 DC-Short, 2000 DC and 3000 DC |
|---|---|
| Mains families | 2000 AC and 6000 AC |
| Published IP class | IP20 for the roller motor families listed here |
Original system illustrations
Illustrations show the referenced parts. They are not to scale. Check the exact system and current specification; visual similarity does not establish interchangeability.

R2105-DC
Motor option for the compatible System 32 roller arrangement.
0.5Nm rated torque; USB-C charging.
Reference only · not sold separately
R2115-DC-SHORT
Short-body motor arrangement using a separate specified battery.
1.1Nm rated torque; external battery.
Reference only · not sold separately
R2116-BATT
Power source for the listed compatible motor arrangement.
2500mAh in the 1100 DC-Short specification.
Reference only · not sold separately
R2110-DC
Rechargeable motor option for compatible roller systems.
1.1Nm rated torque; USB-C charging.
Reference only · not sold separately
R2120-DC
Rechargeable motor option for the specified roller system.
2.0Nm rated torque.
Reference only · not sold separately
R2130-DC
Higher-torque rechargeable option within the listed family.
3.0Nm rated torque.
Reference only · not sold separately
R2125-DCM
The specified 2000-series motor with Matter control.
Matter version; confirm complete control setup.
Reference only · not sold separately
R2135-DCM
The specified 3000-series motor with Matter control.
Matter version; confirm complete control setup.
Reference only · not sold separately
R2150-AC
Hard-wired option for the compatible roller arrangement.
2.0Nm; AC100–240V, 50–60Hz.
Reference only · not sold separately
R2155-ACM
The listed mains-powered Matter-control version.
Electrical and control requirements confirmed for the project.
Reference only · not sold separately
R2160-AC
Mains motor option used with the compatible larger system.
6Nm; AC230V, 50Hz.
Reference only · not sold separately
R2990-35
Matches the motor to the listed tube, crown, drive and brackets.
35mm motorised system.
Reference only · not sold separately
R2990-40
Matches the motor to the listed tube and bracket arrangement.
40mm motorised system.
Reference only · not sold separately
R2990-45
Matches the motor to the listed tube, drive and brackets.
45mm motorised system.
Reference only · not sold separately
R2990-55
Provides the control bracket, idle end and tube plate arrangement.
55mm tube.
Reference only · not sold separately
R2995-40
Supports the listed double-roller motorised arrangement.
For 70mm full fascia RM2108; roller systems only.
Reference only · not sold separately| Motor | Rated torque | Battery capacity | Minimum blind width in source | Source load figure |
|---|---|---|---|---|
| 500 DC | 0.5Nm | 2600mAh | 490mm | 1.9kg |
| 1100 DC | 1.1Nm | 2600mAh | 520mm | 3.5kg |
| 1100 DC-Short | 1.1Nm | External 2500mAh | 400mm | 3.5kg |
| 2000 DC | 2.0Nm | 2500mAh | 630mm | 6kg |
| 3000 DC | 3.0Nm | 5000mAh | 665mm | 8.5kg |
January 2026 source values. The complete blind specification, chosen fabric and current motor version determine suitability for the project.
| Motor | Rated torque | Rated supply | Rated power | Minimum blind width in source |
|---|---|---|---|---|
| 2000 AC | 2.0Nm | AC100–240V, 50–60Hz | 18W | 560mm |
| 6000 AC | 6Nm | AC230V, 50Hz | 146W | 650mm |
Reference information is drawn from the manufacturer’s January 2026 component documentation. Product generations and specifications can change. The final complete-product specification is confirmed with your quotation.
Let’s work through the details
Tell us which products interest you, save a finish shortlist or show us the space. We’ll help you agree the design, measuring, made-to-measure supply and professional installation you need.
Monday–Friday, 9am–5pm
Online enquiries at any time.
We aim to reply within 24 hours. Appointment dates and any specialist installation requirements are confirmed by our team.
For complete blind or shutter projects. Components in this reference library are not sold separately.