Temporary Blinds are instant window blinds that you can use immediately while waiting for the real blinds being manufactured. They are also called: Paper Blinds, Temporary Paper Blinds, Quick Blinds etc.
Have you lately moved into a new place and searching out ideas for décor? In all probability the first thing that comes to mind is the fact that you need new window coverings. However, it takes some time to think about the options before making a final decision. This isn’t an issue anymore as we would like to offer you our Temporary Blinds as instant window blinds that you can use immediately, before making any final commitment and choosing the right type of window treatments for your home or whilst waiting for a permanent window covering.
--
Temporary Window Blinds are a quick fix instant paper window blinds. Temporary Window blinds are a cheap and simple way to cover your windows temporarily.
Simply cut to size, peel back the adhesive backing and stick!
Temporary Window Blinds now come in BLACK or WHITE, with alcohol wipes for degreasing the sticking surface before installation, and thumb tacks for helping to hold the blinds up for less sticky surfaces such as wood and plasterboard.
Our Temporary Blinds are easy to install as it takes only a few minutes:
STEP 1 - Cut the blind size out, by using a utility knife/sharp scissor, according to the window size;
STEP 2 - Before attaching it, make sure that the surface is clean. Use provided alcohol wipes provided;
STEP 3 - Peel the backing from the adhesive tape and attach them with the sticky part on the upper part of the window.
In more details:
SIZE THE BLINDS
Before doing anything, you’ll want to consider the cutting position and how the blinds will overlaps. Line the blinds up on the sill as shown in the photo.
MARK THE CUT POSITION
This is important
Ideally, we recommend the blinds have. 5cm (2 inch) overlap. If working with a 5cm overlap, you’ll mark each blind 2.5cm from the centre position (or the ‘centre of the join’). Take the time to double check your marks, and be sure to look at the photos below to see what you should end up with.
CUT THE BLINDS
When you’ve double checked the cutting positions, you’ll be ready to cut the blinds.
Instead of trying to cut the whole blind in one stack, we recommend that you open the full into two.
PREPARE TO FIT THE BLINDS
If everything has gone according to plan, you should have a set-up similar to the one in the photo.
Position the blinds as shown and visualise where those blinds will be fitted.
CLEAN THE FITTING SURFACE
Use the alcohol wipes that were included in the pack to clean the surface where you will be sticking the blinds. The idea of this step is to de-grease the surface so that you get a good bond to the window. Ideally, you’ll be fitting the blinds to PVC or Glass. Aluminium is okay too, but sometimes the powder coat paint is very shiny stops the tape bonding well. In this case you can use two lines of sticky tape.
PEEL THE TAPES
Depending on whether you think you need one line of tape or two, carefully peel back the backing paper of the sticky tapes.
At this point, the blinds will be ‘sticky’, so be careful and ensure the tape doesn’t come into contact with anything that you don’t want it to stick to!
FIT THE FIRST BLIND
Offer the blind up to the fitting position. If you are fitting inside a recess (up against a wall), then before you actually stick the blind fully, let the blind drop down the window and just check how well the blind sits against the side wall.
When you’re happy with the position, you can go ahead and stick the first blind.
FIT THE SECOND BLIND
Do the same with the second blind.
TOP TIP
Try to work left to right. Be careful with the sticky tape of the second blind coming into contact with the paper of the first blind, until you’re ready to commit to that fitting position.
CLIP TO POSITION
Once you’ve made the installation, you can clip the blind up to the desired height. Use one clip at the join position, it will hold the blind much neater and make everything look tidy.
- Please do not use a craft knife or blade;
- Note that our Temporary Blinds are NOT RECOMMENDED or SUITABLE FOR DAMP AREAS;
- Please keep small parts out of reach of children;
- Do not install blinds near a naked flame;
- No responsibility will be taken for any damage caused as a result of using these Temporary Instant Blinds. You should test the fixing surfaces before applying the adhesive tape of the blinds.
